Fence Company in Fort Worth, TX | Cedar Privacy, Pipe & Wire

Fence Company in Fort Worth, TX: Installation, Repair & Gates

Fort Worth Fence Company serves homeowners searching for a fence company near me in Fort Worth, Arlington, North Richland Hills, Haltom City, Hurst and throughout the surrounding area. Whether you need new fence installation, repair work, gate service or storm damage restoration, we handle the full range of residential and commercial fencing on your property. From wood and privacy fence installation to vinyl, chain link and aluminum and ornamental iron fencing, we install and repair the fences that define the lots across Greater Fort Worth.

The same crew that arrives at your fence line is the crew that finishes it. We know the clay soil that shifts with every wet and dry cycle, the humidity that works on wood at the ground line, and the storm season that flattens fences from June through November. In subdivisions where every lot is fenced and HOA cedar standards are the norm, we work to code and to your property line. When your fence needs work, call (817) 632-6893 for a free estimate.

Why Fences Lean in Fort Worth: Clay Soil and Rotted Posts

Most leaning fences in this market are not a panel problem. They are a post problem, and the cause is the soil itself. Greater Fort Worth sits on expansive clay that swells when wet and shrinks when dry, cycling through the seasons and working a fence post back and forth year after year. Over time that motion racks the post out of plumb, and the fence line that looked straight in spring leans visibly by late summer. At the same time, humidity keeps the wood damp right at the ground line, exactly where the post carries its load. That moisture leads to rot, and a post that has decayed at the base will not hold the fence upright no matter how sound the pickets and rails above it are.

We assess a fence by walking the whole line, not the one section that was called in. We test every post, not just the one that moved. We check whether the concrete footing itself has heaved or the post has failed inside sound concrete. That tells us what we are actually looking at: a repair or a replacement. A fence with sound pickets, rails and stringers and a handful of failed posts is worth repairing. Resetting or replacing those posts saves the rest of the fence and costs far less than starting over. A fence where the posts have rotted or heaved along the whole run is at end of life. Repairing it section by section over the next five years will cost more than replacing it once and building it right the second time. We quote both when both are real options, and we tell you which spend makes sense. On rotted wood, we replace it. Moisture at the ground line is the cause. We do not perform termite or pest inspections, apply chemical treatments, or carry out pest control, which is a separate regulated trade. If you have a fence that is leaning, moving or showing decay, call (817) 632-6893 for a fence post repair and replacement assessment, or request a free estimate online.

The difference between a repair that holds and a repair that fails often comes down to how the post is set. Posts tamped into the ground without concrete will work loose over time. Posts set in concrete, with proper spacing and grade-following installation, will hold through the clay cycles that flatten the rest. When we rebuild a fence line after a repair or replacement, we build it to stay.

Storm Damage Fence Repair in Fort Worth

Hurricane, derecho and straight-line wind damage can push whole runs of fence over on the same line, snap posts at grade, and tear panels clean away. When a fence comes down in a storm, the opportunity is to rebuild it better. New posts should be set in concrete and spaced to code. New panels should be chosen for durability in this climate. A fence rebuilt after a storm that repeats the mistakes of the one that failed is a missed chance. We assess storm damage section by section, photograph what we find, and provide a written estimate that you can give to your insurance carrier if you choose to file a claim. We help you document the damage so you have clear information about what happened and what it will cost to put right.

Coverage decisions rest with your insurance company, and those decisions vary. We do not adjudicate claims, we do not represent you to your carrier, and we do not promise or imply that any repair will be covered. We provide honest damage assessment and pricing. If you have storm damage to your fence, call us for a storm damage fence repair assessment and we will give you the facts you need to decide your next step.

Cedar, Pine, Vinyl or Chain Link: Choosing for This Climate

Cedar looks good and holds value in a neighborhood where HOA standards favor it, but it demands maintenance. Under this sun and humidity, a cedar fence needs cleaning and re-staining every two to three years to hold its color and shed water properly. That cycle is what decides whether it lasts closer to ten years or closer to twenty. Pressure-treated pine costs less, requires less frequent staining, and is often the smarter budget call when the fence is going in the back and the look matters less than the performance. Vinyl and PVC require no staining and hold their color, though they are not ideal for every application and cost more per linear foot upfront. Chain link is the toughest dollar-for-dollar material we install. The gauge of the wire and the mesh size determine how it performs, and galvanized or powder-coated finish makes the difference between a fence that lasts and one that corrodes. Aluminum and ornamental iron work beautifully in front yards and around pools where the look is part of the point, and they can be racked to follow grade on sloped lots better than wood or vinyl.

The right material depends on your budget, the look you want, how much maintenance you will do, and what the fence is for. We quote every project by the linear foot on site, because slope, access, tear-out and gate count change the actual number. Request a free estimate and we will walk your fence line, discuss what works in your soil and under your sun, and show you the pricing for the materials that fit your project.

Permits, HOA Rules, Property Lines & Pool Barriers

Fence height, setback, corner-visibility and material rules are set by your city or county, and requirements vary across Greater Fort Worth. Many jurisdictions require a permit before installation starts, while others do not. In master-planned subdivisions and HOA communities, deed restrictions and architectural standards commonly govern the height, material and color of your fence, and approval from the architectural review board is usually required before work begins. It is worth checking with your HOA and the local building department early to understand what applies at your address. On property lines, we install on the line you identify, working from your existing survey or plat. Determining a property boundary is the work of a licensed land surveyor, and we do not offer boundary surveys or opinions on where a line lies. Before we start, confirm your fence line and any necessary neighbor or association consent in writing. If a pool barrier is part of your project, we install it to meet the pool barrier codes that apply at your address, with self-closing self-latching hardware. We do not certify compliance with pool codes, and final determination of whether a barrier meets the requirements rests with your local building official. No barrier replaces supervision.

Before we dig post holes, we request a Texas 811 utility locate to mark buried lines. Utility locates cover participating operators only and do not mark private lines such as irrigation or landscape lighting, so tell us about any private lines on your property. Requirements vary by jurisdiction, and HOA rules differ from city to city. Always verify with the Fort Worth building department and your HOA before starting your project. Call (817) 632-6893 or request a free estimate and we will help you understand what applies to your fence.